...clear strip fell out, What do I do to fix this. The long clear strip is the encoder strip that the cartridge carriage reads to know where it is in the printer. It should not have just fallen out. ...
strip of clear plastic, about a quarter inch wide and clear. It runs the length of the print head area. That contains the stop strip. That strip or the sensor on the print head itself may be dirty and
Question about Dell Office Equipment & Supplies
clear plastic strip that runs the width of the printer just behind the printhead cradle. You should be able to see through this strip but not like clear glass. This will also help with this printer if
...jam or some sensor problem. try to clear the paper jam. If the problem still continues after clearing the paper jam, try to clean the encoder strip (clear strip of plastic) located behind the
...strip is a narrow band of clear plastic and can be difficult to see without direct lighting running parallel to metallic rod. e. Close the printer and try again to print. 4. Repositioning the Encoder ...
...strip would usually be behind the ink cartridge carriage. It is a thin clear plastic strip across the length of the carriage. The ink cartridge housing glides back and forth along the encoder
clear strip) passing thru the print head. wipe it off with 409 on a soft cloth. careful do not dislodge it it is delecate check the encoder strip if its on the right groove of the encoder strip sensor
...clear plastic strip. How do I take apart and put it back in? The clear plastic strip could be the encoder strip responsible for the movement of the cartridge carrier in the assembly. Please contact ...
Question about Dell Office Equipment & Supplies
strip. It's a clear plastic strip that runs though the printer cartridges. I clean mine with a light alcohol on an old T-shirt (or other soft cloth). clean one side then move it to the other and clean
...strip is a narrow band of clear plastic and can be difficult to see without direct lighting running parallel to metallic rod. e. Close the printer and try again to print. 2. Repositioning the Encoder ...
598 questions posted
Usually answered in minutes!
995 Questions
574 Questions
608 Questions
509 Questions
441 Questions