Dell PowerEdge 2600 Server "raid add new hard disk" Questions

...RAID.. Just need to add the new HD as a separate HD.. Put the hard disk in, allow the OS to identify it, format the drive and you'll be all set. Hi, PE2600 supported hot plug HD. here the ...

...one virtual disk. a raid 5 array will put the data across all the disks along with parity information. if one disk fails then when you add a replacment disk this parity is used to rebuild your

...RAID 5. Any help would be greatly appreciated. What controller do you have and are you doing JBOD? 1) Buy same size/style hard drive2) Install it in the hot-swap tray3) Plug it in4) Open up Dell ...

RAID' configuration (at least 2 drives, one of which can be allowed to fail and be replaced without loosing your data) ... however if you have only a single drive, plainly this is not possible and you

RAID configuration? Are you sure that Disk 1 and 4 are mirrored to 2 and 3? You must be precise. Because raids can be used in many ways. You can combine any two disks and mirror them to any two disks.

...add the specific driver for your RAID and using the floppy to get the driver installed. Next boot to the recovery console of W2K3 Server. If it finds your hard disk, it will even ask for your ...

...RAID 1. thanks..scott you will need to add the new drive to your array bbfore it will how up to be formated do this throught the array configuration util Regards Al "alstech" what I need to ...