Dell PowerEdge 2600 Server "raid 1" Questions

...a 2600 doesn't support RAID 4. You can do RAID 0, RAID 1 and RAID 5. With 3 HDD's your best bet would be a RAID 5. Mirroring is RAID 1 (which would only use 2 of the drives) Ctrl M during power up

...1 logical drive and a spare 36 GB 10 k drive. Its called the JBOD RAID option - just a bunch of discs. I don't know of any system that makes a RAID array an operational imperative, I would say the ...

raid 5 configuration. I have 1 bad hard drive. What do i need to do to swap it out for a drive of the same size? Yes. Verify that it is RAID 5 in your RAID config utility, and swap. It may take a

raid 1 You will not be able to increase the hdd size of a raid array, it's size is set. If you need more storage, you can add additional drives ( either in raid or standalone ) and use the new drive(s

can I install sco open server 5.0.5 on poweredge server 2950 which is having PERC 6/1 raid controller Hi , You can move a program from sco openserver 5.04 to newer platform it supports RAID controller

...RAID software." -- https://cs.uwaterloo.ca/~brecht/servers/docs/PowerEdge-2600/en/Pe2600/IT/5j721c70.htm#1058064 > it does detect it on controller initiation. Even when the drive is not spinning, ...

...Raid 5 without toching the current setting . is it possiable to do this type please suggest Here is a link to info from Dell about exactly how to do it. ...

raid 1 configuration. cant access setup via f2 or utilities f10 unless the raid card is moved between slots! under this circumstance i can access the sas 6 utiity, and had to synchronise the secondary

raid 1 now. what raid do i set it to to add the other drive for more storage without losing any info from the original 36GB drive. I have a parc 4 card(PCI 250ram) installed. thanks servergms 2 drives

...has failed. I would replace this first as RAID controllers are less expensive than replacing the system board, or the server as a whole. Suggested: PERC 5i (RAID 0/1/5) or PERC 5iR (RAID 1 or 0