Konica Minolta Bizhub Press C6000 Copier "turn controller printer" Questions

...not connected Check the cable connections between the printer and controller. Restart the printer. If that does not work then turn the printer off and restart the controller then turn the printer

...controller memory error Action Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the printer to initialize. If a surge protector is used, ...

...turn it OFF. 2. Remove the printer drivers from the 'add/remove" wizard. 3. Delete the printer from the control panel. 1. Open control panel. 2. Select "Printers" icon and doubble click on it. 3. ...

...Control OFF. Restart computer. Turn on printer, let it warm up completely. Plug printer into computer. If you have the correct driver it should install. Test print. Turn Account Control back

...controller via the Di551 control panel. b. Turn off the sub switch (front switch) of the printer. c. Turn off the main switch (rear switch) of the printer. This procedure assures that the controller ...

...controller via the Di5510 control panel. b. Turn off the sub switch (front switch) of the printer. c. Turn off the main switch (rear switch) of the printer. This procedure assures that the controller ...

turn on the printer. It should now print normally. If it doesn't you will need to uninstall the printer using the Control Panel-Add/remove Programs-Epson Printer Software. After you have done all this

...Controller. 2)Turn on the copier and short the jumper wires JP3 and JP4 on the dc controller pcb with a screwdriver. 3)The count ratio indicator on the control panel turns on 'F'. When 'F' is turned ...

...to the control panel of the printer printer normally starts I would try to take off the control panel and reinstall. If that does not work, try a new control panel. Please turn off the printer