...YES: Replace the reader controller PCB. Below is the site this came from which lists all the error codes in case another occurs after you resolve this one Canon iR3300 Error Codes List page 1 from ...
Question about Cannon Office Equipment & Supplies
...controller cooling error E196 the EEPROM is faulty E202 there is an HP error E225 there is an error in the intensity of light E227 there is an error in the power supply (24 V) E240 there is an error ...
...error 55.1 DC controller memory error Action Turn off the power by using the power switch, wait at least 30 seconds, and then turn on the power and wait for the printer to initialize. If a surge ...
...Error code E000733-0001 on Canon IR2200 E733-0001 means a fault is detected by the main controller PCB in the communication between the DC controller PCB and the main controller PCB. Main cause: The ...
Question about Canon Office Equipment & Supplies
error repeatedly occurs although the power is turned OFF and then ON for several times, execute the following remedies. (1) Check the connection between the Main Controller PCB and the CIS Unit. (J2)
...controller I wish success AToe E02D05 Air flow fan error Airflow is not detected 1.Cable connection check Replace the cable between the air flow fan and engine controller if the connection is not ...
...error 1. This means that the machine does not detect the connection signal from the HDD. CHECK THESE; poor connection between the HDD and the HDD controller, the AC power connector to the HDD is ...
If the error persists, verify that the J131 and J132 connections on the DC controller are firmly connected. If the error persists, replace the DC controller. If the error persists, replace the product
Question about Canon Office Equipment & Supplies
...error has occured in communication between fax controll PCB and main controller PCB.Check the connection of the cable between the fax controll PCB and main controller PCB.rEPLACE THE rom dimm of the ...
Question about Canon Office Equipment & Supplies
6: Phase locked) In most cases you need to replace laser unit, but first, you need to check all the connections between electronic board and laser unit. Best Regards
53 questions posted
Usually answered in minutes!
1,023 Questions
924 Questions
417 Questions
321 Questions
302 Questions