Question about Konica Minolta Office Equipment & Supplies
...reset the drum counter? When you replace the drum unit with a new one, you need to reset the drum unit counter by completing the following steps: Turn the the machine?s power switch back on. Press ...
...reset the drum counter via the printers control panel. 5.Make sure that the machine is turned on. 6.Press C / Return (?) Clear / Back. 7. To confirm you are installing a new drum, press ?. 8.When the ...
Question about Konica Minolta Office Equipment & Supplies
...reset drum count but when I press options, no display comes up to reset. Just beeps loudly at me. You have to open the front door and then press options, should see Replace Drum? just answer yes. The ...
Question about Xerox Office Equipment & Supplies
...Drum Reset Switch to actuate for a moment when the Side Door is closed. This is with the provision that the Drum Reset Circuit is working properly. That momentary actuation of the Drum Reset Switch, ...
reset konica drum counter has it been replaced???????????????????????/ Has the drum been replaced? If not reset code for drum without replacing the drum is not good. Because the copier works based on ...
...Drum Reset Instructions The Drum LED continues to blink if the drum counter was not reset when you replaced the drum. To reset the drum follow the instructions below: Press the cover release button ...
Question about Konica Minolta Office Equipment & Supplies
...reset the drum counter as instructed below. 5.Make sure that the machine is turned on. For MFC users: To confirm you are installing a new drum, press 1. For DCP users To confirm you are installing a ...
Question about Konica Minolta Office Equipment & Supplies
...drum. To reset the drum follow the instructions below: Open the front cover of the printer. Press and hold down Go button for about 4 seconds until al the LEDs light up. Once all 4 LEDs are lit, ...
Question about Panasonic Office Equipment & Supplies
...drum to reset the drum counter. if the drum is replaced incorrectly or is from a poor supplier then the flag will be in the wrong position and when inserted will not reset the counter. try another ...
14 questions posted
Usually answered in minutes!
1,023 Questions
924 Questions
417 Questions
321 Questions
302 Questions