Question about Epson Stylus Office Equipment & Supplies
nozzle check to see if the nozzles are clogged by dried inks that why nothings printing. turn off the printer than press and hold power and paper button together for 3 sec. then release, it will print
...nozzle check. You may need to repeat the cleaning pad routine but even a solidly clogged printer can be brought back to life so long as you are patient and you have the right solution (obviously). ...
Question about Epson Stylus Office Equipment & Supplies
...delicate coz they mean quality... the printheads of their cartridges are having many hundreds of nozzles and so it is very easy to get clogged.. if you have clogging problem try using the cleaning ...
Question about Epson Stylus Office Equipment & Supplies
...clogged nozzles. Easiest way to check is to use the Maintenance functions to print off a nozzle check and then look for any missing grid lines as this indicates nozzle clogs. If there are then it's ...
nozzle is clogged on my printer. I have ran head cleanings, nozzle cleanings, manual cleaning, power cleanings, K2 cleanings, general cleanings, pummeled the cap assembly, etc. Nothing has worked. The
...nozzle of your printer are clogged by dried inks, to print a nozzle check. turn off the printer then press and hold the paper (middle) and power buttons together for 3 seconds then release. it should ...
...nozzle check, & put new cartridge in but no change. its possible that the yellow nozzles are totally clogged. Its possible that you would need a new printer. See your epson service center, maybe ...
Question about Epson Stylus Office Equipment & Supplies
...printing photos, several horizontal lines lines appear. How can I remove/prevent them? It must the nozzle check is not perfect. Check nozzle and do head cleaning procedure. If there is just little ...
Question about Epson Stylus Office Equipment & Supplies
...clogged i was printing and some colors where lacking in the picture i went for a nozzle cleaning and that massege came up Try submerging it in a small plastic container in warm water just enough to ...
...clogged in the past I did Nozzle Check and that always fixed things. Now I'm getting multiple clogs that I can't get cleared out. When I do the Nozzle check it shows two colors clogged, then the next ...
504 questions posted
Usually answered in minutes!
1,911 Questions
664 Questions
510 Questions
438 Questions
438 Questions