Question about Filter Vacuums
...Vacuum suction a lot better after have done the above. It's very very hard to push while using. Any suggestions. It's a Eureka 431 type AXE. Page 5 and 6 for the height adjustment knob. You are too ...
...suction is too strong, and it has been draging and really hard to push for some time now. Occasionally I won't have this problem. It is ruining my carpets because the suction is so strong. I took it ...
...suction and bypass valve seems to be loose My Dyson Animal will not hardly **** at all. I suspect it is the bypass valve on the side as it doesn't seem to seat down properly and comes off way to ...
Question about Dyson Vacuums
...vacuum suction up the extendable pipe, but when you pull the handle back, it should gently glide from one direction over to direct vacuum suction to the bottom plate. It's tha part which is getting ...
up fine, So I dont believe it is a suction issue. However, something must be wrong for it to be so hard to push! Any ideas? Check all the wheels to see if they turn freely. Perhaps one is just hung up
Question about Kenmore Vacuums
...vacuum has good suction but i can hardly push it across my carpet. any answers???? my kenmore upright 116 is very hard to push is your brush roller turning,that would cause it to be hard to push .the ...
...suction from the brush bar. There's a little section of curved grey pipe near the base which carries the dirt from the head up the vertical pipe at the back. This section can be removed, check there ...
pushes hard Check for obstructions under the suction portion of the vacuum where the roller is located. If a belt is installed, check to see if its broken. Hope this helps.
...I don't know what model vacuum you have but if there is a way of adjusting the amount of suction; try reducing it. Otherwise, it could be the nape of the carpet. how about adjusting for carpet
...push it along. And, the suction is too hard I think because it used to push easily and now I have to push really hard, even on flat carpet. Check entire length of hose, including the piece in the ...
1,047 questions posted
Usually answered in minutes!
1,132 Questions
836 Questions
655 Questions
597 Questions
450 Questions