Dyson DC07 Animal Bagless Upright Cyclonic Vacuum "beater bar longer" Questions

...beater bar. You will find the belt on one end or the other of the beater bar. Usually there is two longer screws holding a plate over the beater bar. Take that off and you should see the belt or at ...

beater bar stopped working I caught the edge of a rug in the beater bar and it stopped working. I have pushed the reset button but it did not fix this problem. The suction still works- it's just that ...

works fine but the belt isn't turning the brush. JKGonzo: You'll need to open the vacuum head and remove the beater bar. Clean up the bearings at each end of the beater bar and reassemble the head

...beater bars and the tube that connects to the longer tube. I've tried tape on the end of a long-handled screwdriver. I've tried a safety pin taped to a long handle, but nothing works. ...

beater bar is either jammed with string or threads inbetween the housing or the belt inside of it is off or broke.Turn the beater bar upside down, remove the screws and seperate the housing.Please let

...beater bar. There is nothing blocking the beater bar, but the clutch piece appears to drop lower than the indicator line for carpets when extended for normal carpet vaccuuming. The noise is happening ...

beater bar jam beater bar gets stuck so the belt will no longer turn it because of the friction. Bar has been cleaned thoroughly, so problem is in the drive motor which is only accessible by taking it

...beater bar is spinning but no longer touches carpet surface to pick up hair or thread .There is still plenty of suction. If I ever so lightly place my hand on the top of the beater brush it works ...

beater bar and have taken apart the front plate pieces to make sure that there is nothing blocking airflow. While I have the front plate stuff removed, I checked for vacuum power at the point that the

...belt? If there is too much friction and the beater bar is no longer rotating, you may only need to replace the belt. You shouldn't have to replace the clutch, but this is not an easy repair