network. I use belden cat5e and did not even exceed 30 meters lenght. pls help.. Ethernet cables can be 100 meters in length. I would imagine you didn't punch the cable correct. Make sure you have
Question about Computers & Internet
...Please follow the link below to find the answer of your question http://fcit.usf.edu/network/chap4/chap4.htm Get a network cable tester from CablesToGo. It will save you a lot of time and
...in your control panel and make sure you LAN connection is enabled. Good luck test the cable with a network cable tester if have got one to be sure if the cable or network point is the
...cable will still connect. I have connected the "tester" and the "Remote" together with the short cable. Do I now add another cable and plug into my wall plug?? ...
...network card is bad.You can try moving the cable to an existing working port on the switch to see if it links up. If not then try another device like a laptop or printer with a NIC card on the ...
...cable and put a network RJ45 on the end, is that possible? Many Thanks in advance Sure you can, But.... what are you going to use it for? if to connect 1pc to another there will be no connection, as ...
...cable tester that will check all the wires. If you use a DVM check 1 to 1, 2 to 2 etc. for continuity. Good will read 0 ohms, open will read infinity or OL on some meters. 90% of all cable problems ...
...tester at Home Depot and the cable checked ok. If I run a shorter patch cord to the same WAP it works fine (but of course I did not "make" this one. Any ideas of what I could have done wrong when ...
...cable up in the landing with a cat5e socket but its not working some of the lights go out no the cat5 tester an i do not know how to conet the socket can you help me thanks for your time There are 2 ...
1 questions posted
Usually answered in minutes!
7 Questions
2 Questions
11 Questions
2 Questions
