3Com SuperStack 3 3824 (3cr17402-91-uk) 44x1000 Mbps Networking Switch "console connect" Questions

Wants to reset 3824 3com switch via console 3824 3Com switch - connecting from my notebook with serial cable - windows xp hyper terminal- shows connected, but I can't type anything.wants to reset the ...

...connect the switch to an operation terminal. The Mini USB and console interfaces on a switch are multiplexed and enable connection to the switch through different types of physical interfaces. Only ...

...connect to the console of the switch. as per the manual instructions i had already connected switch console port and pc through db9 cable.but on pc when i connect the switch through pc emulator then ...

connect from console port Verify that the correct settings and cable/connectors (rollover cable, correct COM port specified) are being used when establishing the console connection. From the manual- 3

...connect using serial console port (no signal / data out of serial console port). I don't have IP address of the DS4100B. I don't have its password... How can I reset it to factory default? I am ...

CONNECT TO THE RS232 CONSOLE PORT. WHAT IS nuswitch ds16 CANT CONNECT TO THE RS232 CONSOLE PORT. WHAT IS THE PORT SETTINGS? Just click on default settings in hyperterminal?? if u had not set any in ur

which cable can i use to configure switch HP J4900B The switch comes with a console cable which will be connected to the console/mgmt port one end and the serial port of the Laptop at the other end. ...

...2948 Baseline Switch 48Port SFP Plus The resetting of the password requires the installation of a console cable to the console port. Be sure the terminal emulator program is set to VT-100

...connect hyper terminal If you are connecting to the switch using the console port using a console cable. Make sure your settings for hyper terminal are on COM1 and the baud rate is 9600. If you are ...

...connect to the console port using a roll-over cable RJ45-DB9, connect using hyper terminal or similar using the com port settings 9600,8,N,1You can then configure the switch from the CLI...Have you ...