3Com SuperStack 3 3824 (3cr17402-91-uk) 44x1000 Mbps Networking Switch "connect switch" Questions

3Com 3824 Hi , I'm having problem connecting to my 3com 3824 using window vista. the method i use to connect via command prompt using telnet it prompt me "could not open connection to the host , on ...

Wants to reset 3824 3com switch via console 3824 3Com switch - connecting from my notebook with serial cable - windows xp hyper terminal- shows connected, but I can't type anything.wants to reset the ...

...Connect the switch with a null-modem cable In windows, hyperterminal , To enter into Password Recovery Mode: login: recover password: recover Turn the power off (hard reset) within 30seconds Re-enter ...

...switch like new means the function like new from the factory.... plz help me sir Connect some text-based terminal emulator such as Hyperterm, telnet,VT100, etc to the serial port. Configure the ...

... but extremely slowly. I am trying to do a multicast via Zenworks imaging and I only have 3 clients connected to it, usually we have upwards of 5 and experience speeds better than this. Thanks, mike ...

...connect to switch but i can't surf the internet with that pc. the IP Address of 4th pc shows 169.254.....192. so please help me how can connect two more pcs to internet with 8 port d-link switch ...

...Switch and connect it to one of the existing ports on the old or connected switch. it's just a daisychain. Just keep in mind that the LAN connection on the Last switch must be connected to a PORT on ...

connect the switch through pc emulator then blank screen appears The proper way to console to a switch (at least as far as Cisco Catalyst Switches are concerned) is a rollover cable and a DB9 adapter.

switch? I need connect 10 pc's to internet in my office. i have two 8 port dlink switch. but i dont know how to merge those two dlink and want to give connection to all the pc's. please help me... You

...connect the two switches together, there may be a loop in the network...that is, there could be another path for data to pass between the switches. Typically this is caused if there are two cables ...