2006 BMW 3 Series 325xi "1 change light" Questions

...1 miss fire, also changed air filter, car has 86,00 kilometers on it Starting to think I bought a lemo that crysler wanted to get rid of. Lifted the intake maifold to change plugs and gap is set ...

1/2", 67", and 74". Remember to follow safety precautions and consult a professional electrician if needed. How To Install Pendants, Flush Mount and Chandeliers, You Can Do This Yourself (youtube.com)

...module. fuel injector has been changed fuel pump has been changed gas cap has been replaced. check engine light is on goes off too but still says cylinder 1 misfire. Did you reset light after

...dose need a oil change also. The 1% is for the oil life not the level. This means it is time to have your oil changed, and if it was just changed then the light needs to be reset in the message ...

...replace that one injector. That's causing the misfire. Don't let anybody tell you the head has to come off and a valve replaced, just change the #1 injector. If it uses plug wires, change number 1 ...

...1) If I change the sensor, will the lights go out? 2) How difficult is it to change this sensor? It is not hard to change the sensor, it just screws into a threaded hole. The light will not go out ...

Change bank 1 sensor 1 this will solve your problem. Tihs is a fuel issue nit a thermostat issue. change air flow meter Did you bleed out all the air in the coolant after replacing the thermostat does

...is what all does maintenance 1 or/and 2 entail? Thank you John Grove when you do a oil change you need to reset or light will come . to do this you turn on key hit gas pedal 3 times really ...

...1 will burn out . The low beam. I will change both lights. again not touching the leans putting them in with a clean rag.work great then in about 3 mouths the other side low beam will burn out. Again ...