Rotel Rsp-1068 "receiver plug" Questions

plug my receiver into a 220v plug-in (which the receiver is rated for) then plug my subwoofer into the rear of the receiver. Will the receiver put out 120v to the subwoofer (which it requires) or will

...plug (on a desktop) or the headphone jack (on a laptop) and plug the RCA plugs into the AUX on your receiver. note the red and white colored plugs and the red and white colored ports on the

...on the back of either the ld tv or cd inputs on the receiver then plug it in and set the setting on the receiver to the same RCA you plugged it into then turn your TV and receiver volume up and

...plug out of the wall and let the receiver sit there for an hour with nothing connected. Then plug it back in plug in your headphones switch the receiver to FM and see what happens. If the protect is ...

...tried plugging this receiver into a different power socket to test, but I don't think the power plug is the problem. Note: I have the subwoofer plugged into the power plug on the back of the

...and plug it in to and out of the receiver several times. It cleanes internal contacts and you receiver works again. Good idea to put some contact cleaner on the plug. Hope it helps. Let me

...Receiver: Input plug-ins: Phono Aux Tape 1 Rec PB Tape 2 Rec PB Rec/PB On the front: Filter: Low (on/off) High (on/off) Rec Selector FM Phono Source Duplicate -Tape -Monitor 1 (on/off) -Monitor 2 ...

...receiver isn't grounded. Are you plugging this in to the correct plug on your receive and from your cable box? It should be HDMI OUT on your cable box, and one of the HDMI Inputs on your receiver. ...

...plug one side of the cables to the out on the dvd player to the video in on the receiver. make sure you match the colors. video out from the receiver will go to the video in on the tv. make sure you ...

receiver and plug the dvd player directly into the back of the projection tv, it works fine. WHy wont the receiver process the video and audio in cables (not hdmi video in) When you plug the AV cables