...there. I found one of the CF card pins bent over, shorted out the socket and blew the mainboard fuse. I took the camera apart, found the fuse (labelled K) about under the set button area) I ...
Question about Canon Rebel Cameras
...a new battery and recharged the old one but it is still just dead Hello, I think you have a faulty fuse (there are three in total) inside the camera. The fuse might have blown because of bent pin
...into the memory slot. After we removed it, the camera will not power up. Any suggestions? A micro fuse probably blew out in the power supply circuit - take it to a camera repair shop to replace the ...
Camera does not switch on, I have checked the battery which is OK and fully charged. Could be internal fuse.........Tricky
Canon rebel xt Where is the circuit board fuse? Thanks; Steve Hi, sorry I dont' know I have a friend that I send them to for no power repair. Im going to ask him for details becuase he can no longer ...
...Rebel XTI will not turn on. I replaced the battery, but it still won't turn on. Could be a blown fuse. There is some help here, if you are OK taking your camera apart - but read the entire thing ...
...working)can not do setings and playback on lcd monitor thanks I have seen this fault after a blown fuse caused by bent pins in the CF unit. I think the camera needs to be taken to an expert for ...
...- press on them while the camera is on to see if it powers up. If not, there's probably a blown fuse - it will have to go to the
...power up. Battery seems to be charging? Replaced small watch battery inside. Camera motor drive P Fuse gone thats why its not powering up please replace it you can get power and make sure there is ...
my camera went completely dead and it is not a battery or CF problem The Canon digital SLRs have internal fuses on the main circuit board. These are soldered onto the main board and are not user ...
1,519 questions posted
Usually answered in minutes!
27 Questions
