...I have also seen the paper actually wrap around the fuser roll, which would cause the same symptoms...be careful removing the paper if that has happened...the fuser roll can be easily damaged
Question about Canon Office Equipment & Supplies
is in Jasper, FL 32052; have bought it a while back from the canon rep from Jax, FL; were leasinf for 3 years, and than bought it Thats the "Classic" symptoms of a "Fuser". Sounds like he may be right
Question about Ricoh Office Equipment & Supplies
...them. Still have same problem. Can you help? Thanks, Mr. Mathena this is normally a symptom of the Fuser unit failing within the printer. our company uses nothing but Brother printers and i have
...side of printed page There can be only 2 thing that make this symptom. PCU (fotoconductor unit) or fuser unit. First of all lets identify what unit is defective. Can you identify the fuser unit? You ...
Question about Ricoh Office Equipment & Supplies
...guy replace Teflon sleeve & Pressure roller at a time to shoot out the issue..or else replace fuser assembly.. P/No:RM1-3740-000(120V),RM1-3741-000(220V)..if you are observed grinding sound, ...
Question about Gestetner Office Equipment & Supplies
...Print a counter page. Does it have the same symptoms? If not, the problem is in the optics. If yes, probably the fuser hot roller is worn out (you can look at it and see them) or the drum is worn
Question about Ricoh Office Equipment & Supplies
...is constantly smearing down the left side by the roller... am i correct in assuming that this is a fuser film issue, and if so is it worth replacing in a 15 yr old model? Yes, a (partial) failure of ...
...and then I know there will be a jam. It is intermittent. Did you get yours fixed and was it the fuser? That problem is the registration clutch. You have to order the registration assembly to get ...
...on the machine you probably have a problem with a sensor. I saw sometimes a broken gate in the fuser unit that causes this symptom. Try to look at the fuser unit, you will see a blue plastic
...is still in the printer this may be the problem. If this is not the issue you may have a bad fuser. Click the link below and go to page 78. It has a Symptom-Cause-Solution. Lexmark E120n Hope
34 questions posted
Usually answered in minutes!
629 Questions
382 Questions
267 Questions
215 Questions
218 Questions