Ricoh CL3000E Laser Printer "defective image transfer belt contact" Questions

...image is printed. Defective engine control board Replace the engine control board 4.3.7 WHITE HORIZONTAL LINES OR BANDS Symptom Possible cause Necessary actions Defective PCU Replace the PCU. ...

...image is printed. Defective engine control board Replace the engine control board 4.3.7 WHITE HORIZONTAL LINES OR BANDS Symptom Possible cause Necessary actions Defective PCU Replace the PCU. ...

...Defective main control board 1. Pull out and re-insert the image transfer belt unit. 2. Clean the image transfer belt cleaning H.P. sensor. 3. Replace the sensor. (Input Check: 5-803- 012) 4. Replace ...

...unit contact sensor ?? Defective paper transfer unit contact motor 1. Check or replace the harness. 2. Replace the image transfer belt unit or paper transfer unit. 3. Replace the HVPS-TTS

...transfer unit. Defective PCU. Replace the PCU. Defective transfer roller. Repair the transfer roller. Defective fusing unit. Replace the fusing unit. Defective engine board. Replace the engine

...defective.
The page length and margins are not set correctly for the paper size. Verify that the ribbon connector at J1307 of the HVPS is properly seated.
If the HVPS has been removed recently, ...

...Transfer Kit. Turn the printer off, then on. Replace the Toner Cartridges. Turn the printer off, then on. 1. Remove the glass plateform 2. Check the exposure lamp continuity, if no continuity replace ...