Ricoh CL4000DN Laser Printer "hold online escape" Questions

...hold down online and escape and turn printer on, the panel should sho a 1 2 3, push 2 for engine and enter press 7 and enter 804 is the counters for supplies. #4 is the fuser press enter after the ...

...hold down online & escape, turn machine on and wait for "1.Service Menu" Select service menu, find sp 5-810, select #/enter, when it says "execute select #/enter, then escape. Turn machine off ...

...online key on a 5200dn. In this case you need to power on while holding escape and the third LCD Burton which is directly above escape. It should reset just by doing this. Mine did just about 5 min ...

...Hold online and escape button together and then turn the machine on while still holding down those two buttons. Continue to hold those buttons down until machine clears it self (will take 2 - 3 ...

...hold down online & escape, turn machine on and wait for "1.Service Menu" Select service menu, find sp 5-810, select #/enter, when it says "execute select #/enter, then escape. Turn machine off ...

...online and escape button at the same time. then turn machine on while still holding down those two buttons. Continue to hold those buttons down until machine clears it self (will take 2 - 3 minutes). ...

...hold online + escape, then power on. Use up and down arrow keys to select SP2 Press Enter Use up and down arrow to locate SP5 Press Enter Use up and down arrow keys to select 810 Press Enter Confirm ...

...Hold down either the online & escape or stop/start & escape while switching the machine on. The machine should start up in service mode. Select 1 for service mode Select 5 for mode Scroll to ...

Hold the ONLINE and ESCAPE key while powering the machine on. Then access SERVICE MENU 2, then FUSER ERROR RESET. Turn the machine off then back on. If it comes back then you will need your fuser unit