Question about Proform Exercise & Fitness
...to remove the drive belt and run the motor without the walk belt connected. Obviously if you still have the noise it will be a motor issue. If not then it will be one of the 2 rollers. Good Luck! ...
...noise, if you get knocking or grumbling while drive motor is running with no drive belt attached then the issue is in your Drive Motor. A lot of times simple maintenance will save your treadmill from ...
Motor noise Excesive noise and it gets worse at slower speeds. It's a whinning sound and it's getting worse. tight a little the drive belt, and test and replace the belt if necessary. ...
if its the drive motor it will be a growl noise. The growl will be so loud at top speed you wont be able to even talk over the noise. Remove the motor hood and this will help you determine the culprit
Question about Proform Exercise & Fitness
...motor makes a noise which is louder at higher speeds The drive motor makes a noise which is louder as the speed increase. It does this even if it runs withoth the belt. It sounds like if some parts ...
...noise, and increases as you speen up. The motor "growls", and the faster you go the noise is..... well loud. The way to confirm this is to remove the motor hood, then start the treadmill on ...
...motor makes a noise like it's working. What do you think would be the cause for this error to be showing and the incline not working. Please help. Thanks in advance Sue Because you are hearing the ...
the faster you go, but starts even at 1 mph. The belt seems to be straight... any ideas? Check the front roller. Remove the drive belt and run the motor. If the noise is not there replace front roller
noise, is the main motor see the diagram attached.However tight any connector or plug very well, and test the s. sensor for open or defective and replace. You can RUN the software calibration for easy
9 questions posted
Usually answered in minutes!
191 Questions
96 Questions
39 Questions
34 Questions
36 Questions