Proform Crosswalk 395 Treadmill "belt slides right" Questions

...right (balance the belt). Your belt should go straight, right now you have it too far to the FRAYED SIDE. Turn the Machine on, have your Hex Wrench in the Bolt and turn it slowly CW and as the belt ...

belt keeps sliding to the right no matter how i align and tighten it. It had been working fine and all of a sudden it keeps sliding It seems like the same problem I'm having I took it apart to replace

belt slides to one side if this is a resident unit. check the back of the unit. make sure there are no broken plastic pieces. if so this could be why you can not adjust the guide. if there is no ...

...right and you will hear the rubbing of the tread on the plastic. Make sure treadmill is running when you adjust belt. The treadmill belt tracks as the belt goes around. I usually put machine on 2-2.5 ...

...belt is moving toward the right, adjust the right side of the rollers to be farther apart (if I'm not mistaken). This should cause the belt to walk to the left. Run the machine and watch for belt ...

...belt: http://www.treadmillsrepair.co.uk/2014/08/treadmill-belt-how-do-you-take-right.html or buy a replacement from

...belt is sliding from left to right One of your rollers is not running true or straight causing this. Take the belt off and see if it is visibly off. Also check to see if there is an adjustment that ...

belt from the deck surface. Step #12- Replace the right side railing with the screws provided using a screwdriver. Step #13- Start the treadmill and align the belt according to the instructions in the

...right side shields to the base unit. Detach the side shields and set them aside. Examine the interior of the base unit and locate the drive belt. 3 Pull the drive belt free of the crank pulley, ...

...slides to the right and causes a loud rubbing noise. How can I correct this problem? Thanks, Find the allen key that came with the machine. If you don't have it, you will need a 3/16" allen key to ...