Proform Power 1080 - Treadmills "overlays" Questions

Some of the console overlay buttons stop responding. If I unscrew the console and remove all connections from the console board, and then re-connect them, the problem goes away temporarily. Sometimes ...

...up its stuck down Pressing Hi Kellie, sounds like the overlay needs to be replaced. Make n model? Overlays fail in this manner due to use and the ultra cheap materials used in the "tactile

landice L8 automatically turns on by itself It is either the control board or the overlay. I would think it is probably the start button on the overlay that is stuck. The solution is to replace the ...

Where might I find a console overlay for a New Balance 1500? I've tried treadmilldoctor and Fitness Quest (NB former parent company)...no luck No one sells just the overlay

Buttons don't work My treadmill turns on but no buttons work now. You press them and they beep but nothing happens. Your overlay is bad. Replace overlay

I have a NordicTrack EXP1000 that completely shuts off after 9 minutes! We lubed the belt, and it did seem to be slipping slightly, but not very much. (We lubed it after realizing it hadn't been done ...

no start no stop of my teadmill t9600 but the other buttons areok all the button on the consol of my t9600 are ok (light and sound) except these three buttons: start, stop and select. I push on these ...

...is bad. You will need to replace the whole console because nordic track does not sell just the overlays. you can get the console at iconservice.com or check on ...

I have a Reebok T4.5 IWM, when I switch on it shows KM or ML and no other buttons work. The console only shows KM or ML I have the same problem and traced it to the display overlay, but having problem

Only certain buttons on the NordicTrack exp1000 treadmill work. Only 3 or 4 of the buttons on my console work. 1) You must check the flexible cord between display board vs controller motor board, and ...