LG LMV1813ST Microwave Oven "replaced blown fuse circuit work" Questions

replaced. If you find a blown fuse, the magnetron circuit has two components that commonly cause the blown fuse. The first is the high-voltage diode in the power supply could be shorted, the second is

...blown fuse broken. replaced it and it is working. however the blown fuse was smaller in size while we replaced with a bigger size. does it matter??? you must replace the FUSE with the same capacity ...

blown fuse. Sometimes you cannot determine a blown fuse by visual inspection so check it with a multimeter for continuity across the terminals. 4Replace the blown fuse. Go to your local hardware store

...replaced, but the underlying issue should still be investigated and resolved. Otherwise the new fuse will blow also. If the microwave is not working the thermal fuse may have blown. When a microwave ...

...time even after the device is turned off at the mains. If the internal fuse has blown, then this can be replaced however it may indicate another problem with the HT power supply side of the

...fuse) is blown. This fuse protects both you and the oven. When it blows, you need to have a qualified appliance repair technician replace it. Door switch If the fuse isn't the problem, check the door ...

...opened the damage cannot be confirmed but if you are lucky the fuse would ahve blown and saved the rest. if so test it with a new fuse using a 220 to 120 volt convertor.( transformer with good

DOESNT WORK I MEAN THE CLOCK DOESNT EVEN LIGHT UP...IS THERE A FUSE OR SOMETHING yes !! check for a circuit breaker type of fuse , or a blown fuse, replace it and plug it again . hope this helps

...BLOWN, BUT WE REPLACED ALL THE FUSES IT STILL DID NOT WORK. (NO LIGHTS, NO NUMBER PAD, NOTHING IS WORKING). OUR NEXT GUESS IS THE CORD???? ANY SUGGESTIONS? IT NEVER GOT "HOT (SMELLING) AS IF ...

...blown- replaced and display still dead. Checked high voltage circuit and all seems OK (but this would not influence the dead display). Removed display circuit board and found track from circuit board ...