LG LMV1813ST Microwave Oven "microwaves blow fuse" Questions

...fuse will blow. If the line fuse blows, the microwave won't start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace ...

...blow the fuse quickly after I installed a new fuse. The microwave is 7 years old. Note that this is an over the oven microwave. Two sons that live with us have a very bad habit of cooking on high on ...

microwave blows fuse in microwave mode grill function ok microwave stopped working checked fuse had blown, replaced fuse tried microwave fuse blown immediately, replaced fuse again and tried all other

...blow again/replaced capacitor/fuse again/blown again/ could problem be power transformer? Maybe... Did you check the high voltage diode?... A shorted diode keeps the fuse blown... Ty Stop using the ...

MAGIC CHEF MODL MCO160UQ KEEPS BLOWING THE FUSE INSIDE THE MICROWAVE WHEN I CHANGE THE FUSE IT WORKS FOR AWHILE THAN BLOWS AGAIN CHECK THE FUSE CORRECT AMPS OTHER WISE BLOWS THE FUSE AND CHECK ANY ...

My Danby microwave model dmw111KSSDD stopped working altogether. It kept blowing my fuse, but would work again when I reset it. Now, nothing. Could it be the microwave fuse? It was having issues and ...

...fuse will blow. If the line fuse blows, the microwave won’t start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace ...

...fuse in the plug blow or the internal fuse if it blows the internal fuse it could be one of the door switches two of the switches have a red button on them and one has an orange button its normally ...

sanyo EMS1000 microwave. Keeps blowing 13amp plug fuse. i have this microwave that keeps on blowing 13amp fuses (plug). a loud pop occured. have changed the fuse, after two uses the same problem ...

higher current fuse with a 15amp fuse, it will blow every time. the install guide http://www.whirlpool.com/assets/pdfs/product/ZINSTALL/8206589.pdf reccommends 20amp not a solution, something to check