LG LMV1813ST Microwave Oven "causes fuse blowing" Questions

Fridigaire Microwave blows fuse after several weeks of use My Fridigaire Gallery microwave blows a fuse. I change the fuse. The microwave works for about 2 weeks and then blows the fuse again. What ...

I have a GE JKP62G microwave-oven combo. The oven works fine. The microwave blew the 15 amp fuse. When I replaced the fuse, per your earlier directions, and tried to use the microwave, the new fuse ...

...blowing fuse. I Check the high voltage rectifier diode and was found to be open both way. I notice that when I changed the fuse, I connected the unit to the wall outlet with door open and there was ...

...fuse blows every time your Electrolux microwave starts up. It sounds like it could be an issue within the control panel, capacitor, or circuit breaker. Because it could be a number of any one of ...

...blowing my fuse, but would work again when I reset it. Now, nothing. Could it be the microwave fuse? It was having issues and kept blowing my fuse. I kept resetting my fuse and it would work again. ...

...extra, replace it and see what happens..if it doesn't blow again, you're most likely ok, if not, there are more causes for the internal fuse to blow, beyond the interlocks, it's not going to be

What could be causing the fuse to blow in my Emerson microwave oven? When turning on unit, the fuse blows. Can you give me a list of things, to look for, that can go wrong, when the fuse blows, a ...

...blowing its fuse. i my ge profile microwave keeps blowing its fuse. i have replaced it several time and have increased the size to 30 v but it still blows. where shal i look for the problem/ Don't ...

micowave blows the fuse when turned on new fuse is installed turn on microwave makes a noise fuse immediately blows The transformer that makes hi voltage for the Magnetron tube is causing the fuse to ...

...CAUSES FUSE TO BLOW WHEN DOOR OPENS. I CHANGED IT AND SAME THING HAPPENS OVER AND OVER. The monitor switch is likely causing the fuse to blow because one of the other switches is stuck in the closed ...