...see if belt has slipped Camshaft setting tool put in position(rocker cover off) pump locking tool inserted, top dead center mark on flywheel in correct position.if not correct something won't line ...
...Setting the camshaft timing isnecessary whenever the camshaft drive system has been disturbed,meaning the relationship between any chain and sprocket has been lost.Correct timing exists when the ...
Question about Seat Alhambra
...camshaft timing marks on a 1994 mazda b2600 i need to set up the camshaft timing marks on a mazda bravo b2600 its not just the camshaft timing marks you set up, you also have to have the crankshaft ...
...Setting Peg (303-531), Camshaft Locking Tool (303-530), Chain Tensioning Tool (303-532), Primary Chain Wedge (303-533) and Variable Camshaft Timing Oil Control Unit Setting Tool (303-654). See Fig. ...
Question about Seat Alhambra
2001 hyundai tiburon 2.0 vin f do you set camshaft before timing Replaced Camshaft sprocket. Should camshaft chain be set before the timing be set. Yes it must be correct.
...camshaft timing) components and the car's PCM (powertrain control module, also called an ECM). That consists of a few different components but the P0011 DTC specifically refers to the camshaft ...
chain, excessive play in the timing chain, or for a timing chain that jumped teeth. Refer to Camshaft Timing Drive Chain Alignment Diagram and Camshaft Timing Drive Components Cleaning and Inspection
Question about Seat Alhambra
...camshaft sprockets aligned w/colored chain links. WHAT is the timing position for the EXHAUST camshafts in relation to the Intake Camshafts? The camshafts, secondary chains and tensioners have been ...
Question about Seat Alhambra
...camshaft sensor, crankshaft sensor, or timing chain can cause this DTC to set. • An actuator that is in the full advance or retard position can cause this DTC to set. • The presence of DTCs P0008 and ...
...camshaft sprocket counterclockwise to take up the belt slack. Insert a 6mm Allen wrench into the hexagon opening located on the top plate of the belt tensioner pulley. Rotate the top plate ...
14 questions posted
Usually answered in minutes!
11 Questions
7 Questions
5 Questions
3 Questions
0 Questions