2005 Mercury Sable GS "disconnect maf sensor car run" Questions

Ad

MAF Cleaner and CRC Throttle Body cleaner. you will need to disconnect the induction hose from the air filter and throttle body. On the Taurus/Sable the air filter is loated on driver side under hood.

Ad

...MAF sensor, or leaks in the PCV systemExhaust leaks before or near where the HO2S is mountedFuel injector(s) restricted or not supplying enough fuelFuel system not supplying enough fuel during high ...

Ad

...Disconnect the MAF does it stay running and also inspect the MAF air duct for cracks and false air leak,From the MAF to the throttle body. with the MAF disconnected and it stay running the MAF is the ...

Question about Mercury Sable

1 Answer

...disconnect the maf the truck runs fine and the code returns,when i reconnect the maf and erase the code the truck runs rough again,everytime i repeat this procedure i get the same results,i have ...

all the advice you get. Try things yourself. Your car runs ... but somewhere in the MAF sensor- EGR valve - O2 sensor there's a glitch. Do the simple things first - disconnect the MAF, clean the EGR .

...can sometimes be cleaned rather than replaced ,, could try disconnecting the maf to see if it runs better or try a reboot of the system.. disconnect the battery for a half hour and then reconnect

...MAF sensor, car runs with SES light on. Exhaust smells rich. If you did not disconnect the battery and drain the voltage from the ECM, it could be using old settings when the problem existed.When a ...

Question about Mercury Sable

2 Answers

...MAF sensor changed still stalls. I have disconnected MAF, engine runs perfectly fine. Ofcourse noticed fuel consumption is much higher. Please tell me what may cause engine stall. Check for any ...

Question about Mercury Sable

1 Answer

MAF Sensor PCM monitorsTPS to MAF readings If readings are not consistant with calibrated load values the test fails & a DTC is set on your dash (1121) Air Leak between MAF & Throttle Body Bad

Question about Mercury Sable

1 Answer

...pump, pressure regulator, and MAF sensor has been replaced. When I disconnect the MAF plug, it picks up and runs fine. When I plug it back in, it BOGS out and dies. BAD PCM? BAD CATLATIC

Not finding what you are looking for?
2005 Mercury Sable GS Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...