2008 Lexus ES 350 "cam belt running straight" Questions

Ad

...cam...belt comes off pullies when running belt is tight Replaced pully something did not look right there is a big lock washer installed behind pully does it belong there [email protected] use a ...

Ad

...cam-drive belt w/# 1 piston at TDC . 9 - adjust tensioner with very little tension against belt ( grab belt w/ tensioner tight above and below tensioner you should only be able to twist belt no more ...

Ad

...cam & crank sprockets. Have test run without timing belt cover & dampener to try & isolate were the belt noise is coming from. Any ideas or tips would be appreciated. Are there part(s) ...

Question about Lexus ES

2 Answers

...belt.also check the cam and crank sensors for damage but i would look toward a misaligned belt, heres the timing marks for the timing belt.ive done a few of these and i know they say its a valve ...

...Cam belt change at 71,000 miles there was a loud bang and clatter from engine. Limped home - no read out on screen to give a clue. Repairer took car back on truck. Called in and told that water pump ...

cam has a mark on the sprockets line them up to a mark on the top of the valve covers and the crank goes straight up if the oil pump is being run by the belt it also has its on marks don't worry about

Question about Lexus ES

1 Answer

...cam sensor (at $225) and may/may not have check the timing belt (I can't get a straight answer). Removing the sensor, the car runs. Any ideas? Thanks, M. sounds like a defected throttle position ...

Question about Lexus ES

1 Answer

cam belt driving along doing 120k when everything went dead and came to hold ,when i start it now it starts straight away but with a knock and runs on all four,the oil light goes out straight away and

Question about Lexus ES

2 Answers

...cam gears with marks on the side of the head. Then install a new timing belt and tensioner. It is a good idea to always change the pump and belt together. I would suggest buying a manual for your ...

...cam gears. Erased codes for now. $4,000.00 to $5,000.00 estimated job when needed. Hard to imagine that this would be the case for this engine built by Toyota and rated as one of the most bulllet ...

Not finding what you are looking for?
2008 Lexus ES 350 Logo

48 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1992 Lexus ES
1992 Lexus ES

11 Questions

2006 Lexus ES
2006 Lexus ES

3 Questions

2007 Lexus ES
2007 Lexus ES

1 Questions

2005 Lexus ES
2005 Lexus ES

2 Questions

1993 Lexus ES
1993 Lexus ES

3 Questions

Top Lexus Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...