2007 Kia K2700 Workhorse "replace clutch" Questions

...clutch and radiator could be a number of things, 1. water pump not working 2. Thermostat stuck (replace if its boiled) 3. air lock in system. 4. Head gasket. 5. cracked head/block. I presume you have ...

...clutch, upper. (Replace) - Worn out clutch cylinder clutch, lower. (Replace). - Worn out clutch plate. (Replace) - Worn out pressure plate. (Replace). - Clutch bearing defective or seized.

...replace a clutch fan on a chevrolet trailblazer how do I replace a fan clutch cable on a chevrolet trailblazer ...

...Replace Clutch Master cylinder honda civic.... replaced with new clutch and clutch kit... now i have to replace the clutch master cylinder..... only done 167k since new clutch.... should this have ...

...master and slave clutch cylinders but clutch still does not work- is there something else i need to look at? if you replace and shure to make a good bleed on clutch fluid, then replace clutch ...

...they replace the clutch plate they should also replace the clutch cover or vice versa. I don't think it's you it's probably just the car. I suggest you have the clutch plate and clutch cover

...replace clutch cable or replace master cylinder. If the clutch has not been replaced it may need a clutch kit as the indications are that the pressure plate is weak ( worn clutch plate or from ...

...replace ur clutch but the check light still on it mean your CO sensors need to clean or replace. if clutch not properly installed --not lined up correctly --or abuse will blow /burn up clutch rapidly ...

again to bleed it, but you will eventually replace the clutch slave and master cylinders. Once the slave is allowed to fully extend, it is then virtually impossible to make it function correctly again

replace the clutch master cylinder or tor replace the clutch assembly Clutch master cylinder is cheaper and easier and is generally the main reason for slipping clutches unless you have a cable clutch