pass lock system will not cause all the problems listed how ever it will cause the no crank and after five min or 30 min start it is most likely the pass lock sensor unless your truck has a pk3 system
how to disable the pass lock on 2008 canyon This link explains it pretty well. http://vatspasslockpasskeysecurityhelp.yolasite.com/
...the fuel delivery at start up, possably to do with what GM installed in the vehical called a Passlock system that cuts off the fuel if the wrong key is being used but I'm not for sure. try locking ...
...lock switch it self has gone bad and will need to be replaced. This is more common if you have lots of keys on your your key chain, the extra weigh wear out the electrical sleeves in the cylinder ...
...pass lock on a 2004 chevy colorado? Google it and get this link: ...
pass door lock The door lock system will not unlock the pass door, all the rest work normally . This makes the pass, front door impossible to open . I tried to pull the lock rod up and pull the handle
...door) needs to be replaced. Before replacing try re-syncing locks. To do this, you need to lock all doors from passenger side, unlock from pass side, re-lock from pass side - then try drivers
pass lock sensor . The pass lock sensor is integrated in the Ignition lock cylinder. The car will start After about 15 minutes. with the key In On position. Because is about the time that the computer
...pass door lock wont lock so car wont lock 01 peugeot 406 hdi pass door lock wont lock so car wont lock does this every few weeks and stops very anoying Remove the door pannel and spray releasing oil ...
...pass lock system on my 99 chey s10 has engaged can it be reset without taking it to the dealer To reset the pass lock system, turn key on for five minuets, then shut key off for five minuets. then ...
15 questions posted
Usually answered in minutes!
284 Questions
178 Questions
146 Questions
43 Questions
13 Questions