2005 Dodge Neon SXT "replaced crank sensor throws code" Questions

...replaced it and I'm getting the same code and the same behavior. What can be going on here that I'm missing? Could it be the crank shaft sensor throwing me a wrong direction? Thanks :) if you noticed ...

...crank sensor defective. It said the crankshaft position sensor signal is monitored. P0315 - Crankshaft Position System Variation Not Learned P0335 - Magnetic Crankshaft Position Sensor Electrical ...

...replaced cam sensor dont start can hear fuel pump what next If your doing no testing at all & just throwing parts at it,then a repair shop would be next Sounds like you should have started there, ...

...replaced the fuel pump and filter. Still getting spark just not completely firing. Was throwing codes but after replacing battery wires there are no more codes. Checked around a little it and thought ...

...replaced the camm sensor, crank sensor, crank sensor connector and the ecm. no clue on what it could be. if you have any answers please let me know I wouldn't expect a professional to replace all you ...

...light came back on Are you sure it was the crank sensor that you replaced? The cam and crank sensors look identical. Was the engine hard or slow to start? If so, this will sometimes set this

...SENSOR USED CRANK AND SCAN PCM AND SEE WHY. THROWING WHAT DTC CODE, NOT TOLD. cmp cam sensor, not ckp crank installed wrong? some sensor must be shimmed to work service manual tells that. no engine ...

replaced crank sensor and cam sensor twice and still throws cam and crank code any one run into this??? What's the code ? P0016 Crank/Camshaft Mis-align/sync. How many miles on the vehicle ? Ever have

...replaced both cam and crank shalf sensors also check mapping of cam over crank signals still throwing code rebuilder said they removed and clean the cvvt unit what do i try next dear friend-did the ...

...I replaced cam position sensor and there is still no spark to coils what would cause this Throwing any codes? Crank sensor working? The cam and crank sensors typically work together to adjust