2011 Chrysler 200 "ten signals" Questions

...signals on the dashboard. the motor starts nocking after about ten to fifteen minutes of running.and looks like it is overheating but i do not understand the overheating signals on the

ran scans and came up with intermittant signal 2000 dodge intrepid, light smoke on take off(only) ten dissapears. Ran scans and came up with intermittent signal from the crank angle sensor, and fan ...

...panel. This relay is round and may be metal. Replace it with an electronic flasher relay. Pay the ten bucks and have trouble free service for a lifetime..... Good Luck. Philip is there a relay ...

Rapid clicking sound like turn signal sound. Happens when first started for about ten seconds then happens sporadically. Where is the turn signal relay located? 2006 Chevrolet Equinox It doesn't sound

signals work but flash fast, nothing works in back lights at all First the left turn signal stopped working, then the next day all lights out in rear, but the fronts work but flash fast. All new bulbs

...or twice,sometimes 6-10 in a row... your emergancy flasher button on your dash is faulty gm has extended the warrenty just go to a local dealer soon cause gm only made it ten years from purchase ...

...the bulb does not flash in front but does in rear. Also the inside indicator flashes slow for about ten clicks then changes to fast. check that you have used the correct bulb for replacement as some ...

for the proper way to check for a bad crank sensor. Good-Day! the bulbs used for signalling is only ten volts. the sensor reduces the voltage going out so your bulbs will not burn out

signals light up but do not blink.All of the bulbs are lighting. Your flasher has died. Its the big round thing (or square) located within your fuse panel. Simply pull it out and replace it. Less than

ow do I reset the rss fault with my ts territory diesal cleaning the sensors but the RSS alarm continues to signal Disconnect battery for ten minutes and reinstall terminals