2011 Chrysler 200 "ringing rear tires" Questions

Ad

...mph 50,000 miles, AWD, 2005 Freestyle CVT, Pirelli Tires, no leaks on ground beneath trans or rear differential. this is caused by worn ring and pinion gears, there is no fix except a rear end ...

Ad

...rear tires, front shocks dropped to touching the tires again, any others problems? Are these air shocks? If they are, then the extra weight on the front wheels can push air past the "O" ring in the ...

Ad

How do I figure out the gear ration on a 4X4 front transaxle with the lable missing? It will be the same as the rear. It the rear is missing you will need to count the ring and pinion teeth. Ring gear

Question about Chrysler 200

1 Answer

2004 gmc envoy 106000 miles, rear humming noise at about 50 to 55 mph. brake work was done about 4000 miles prior. here is a list of things that cause humming from the rear busted belt on the tire, ...

how do i replace the natural vacuum leak detection pump on a 2005 dodge dakota? Vehicles equipped with NGC engine control modules use an NVLD pump and system. Vehicles equipped with JTEC engine ...

How do I get the rear drums off a 2000 Ford focus. I removed the spindle nut, 2000 Ford Focus Drum Removal ProcedureIf removing the drum to service the rear brakes: (note, do not remove hub retaining ...

tires, jack up the rear end. Remove driveshaft from rear end. Loosen but do not remove the leaf springs and the shock absorbers. Remove the brake lines and the emergency brake cable. Return vehicle to

Question about Chrysler 200

1 Answer

rear end slack the driveshaft willl turn a good bit before the tires start to. pinion bearing has some slack both in and out. Would the spider gears be the culprit on ring and pinion i would think ...

Question about Chrysler 200

2 Answers

...tires,unbolt universal rear end to driveshaft, unbolt center bolts from axle to leaf springs, pull the rear end out from the side-much easier with two people. reverse process to put the new one on. I ...

Question about Chrysler 200

1 Answer

Tires, Removal and Installation). -Vehicles with rear drum brakes Release the parking brake. Remove the brake drum and hub assembly. Remove and discard the wheel hub retaining nut. -Vehicles with rear

Not finding what you are looking for?
2011 Chrysler 200 Logo

54 questions posted

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...