2011 Chrysler 200 "bear mask" Questions

...MANUFACTURED FROM JULY 1, 2004, THROUGH SEPTEMBER 3, 2010. THE OUTER RACE OF THE SECONDARY SHAFT BEARING MAY BE BROKEN DURING CERTAIN DRIVING STYLES. A BROKEN OUTER RACE MAY CAUSE ABNORMAL NOISE, ...

...rattling or whining sounds it probably needs to be turned by a machine shop, and the correct size bearings put on. All the bottled solutions will do is mask the noise somewhat, but eventually you ...

wheel bearing my left front wheel looks like it leaning inwards what the problem with that. This is usually a balljoint problem. Although you can try lifting the wheel off the ground and pulling the ...

...of engine when i stand in front with hood open Turn your A/C off, the compressor can make noise if bearings are dry or system is low on compressor oil. Remove your serpentine belt. Turn pulleys by ...

When driving, especially when turning, my equinox maske a loud "scraping" noise much like that of the starter trying to engage. When starting the car, the same "scraping" noise is noticable. Any clues

Changed Tyres on my A4 2008 and now have a humming noise from the front left wheel I have a 2008 Sline B8 Avant Multitronic 2.0TDI 143PS and have just replaced the Michelin 245 40 R18 tyres with a ...

i have a 2004 ford fiesta 1.4 tdci,at the moment the car is still in a non ford garage ,it went in for a osf wheel bearing replaced,it came back to me with the abs light on,after the front wheel was ...

...one another. Most often is it can be related to things like worn out tie rod ends and loose wheel bearings, worn ball joints/trunion bearings and the like. Also, the steering damper may be worn,

...hoping it will give way eventually? any hints? Yes, Undo the 32mm nut, first. And, don't get the bearings dirty with dust from the brake drums, or , if you do, replace the inner and outer bearings ...

whistle noise near alternator Can be the Alternator bearing or a serpentine belt pulley close by. A whistling noise can be a Vacuum leak. Sometimes when installing an Air filter, the ductwork is not ...