2006 BMW 530xi Sedan "ge motor wiring connections" Questions

ge the boot open now, can someone please help me be able to open the boot again when the car is unlocked? Check your fuses, if that does not work, You may have to replace the "Power Door lock Actuator

Ge a pair of jumper cables and jump the car connect the neg end coming from the other vhicles neg side of the battery to the alternator or a good ground spot on your cars motor. then put the lpositive

...GE engines, attach the stiffener plate with the 3 set bolts and tighten them to 27 ft. lbs. (37 Nm).        21. Attach the center mounting and tighten the member side ...

...motor resistor melt from a poor connection. The repair is to replace the blower resistor and the connector to it. This is a common problem and banging on the bottom of the case only gives it a temp ...

wiring harness under the hood down to the left wheel abs sensor. I would suggest that you simply remove the left wheel and inspect the wire that leads to the abs sensor (there is only one wire on each

...ge motor-I tried to install a set of no.2 grind Piper camshafts-this was a failure so I am trying to install the original camshafts the (car has only done 27000kms)however when I came to setting the ...