KitchenAid KUDS30FXSS Builtin Dishwasher "tries start goes cancel" Questions

start it again, same thing happens,,,cancel/drain mode begins. tryed to get any of the other modes to work, will not accept the cycle which I select, goes back to the cancel/drain mode again... please

...start, it does nothing. I can't get the light to clear off. I can "cancel" and it goes through the drain cycle, but when done after opening the door to reload, then trying to start, it does nothing. ...

goes into cancel drain cycle water starts to fill and then the solenoid fires but nothing happens. After 4 times of the solenoid firing the unit goes into drain cancel mode. have unplug dishwasher and

...cancel light is blinking 7 times, hesitates for a second or two, then goes through the same sequence. By running the test normal wash/heat dry, normal wash/heat dry, normal wash it will stop blinking ...

...goes through it's cycle and stops. At this point I try pushing the "Rinse Only" button and then push the "Start" button, and the dishwasher starts up on the last wash cycle it was previously on. How ...

...goes right back to the flashing clean light and not allowing it to start. Turn off the power at the breaker to the DW and wait 15 seconds and then turn it back on and see if problem is fixed. Reboots ...

...start another The clean light indicator is flashing and won't shut off. I have tried to cancel the cycle, but it just flashes clean. because the sensors won't quit flashing, it will not start another ...

...start, so the problem is a bad keypad. Will order a new one tomorrow and let you know if it works. Hi 1cassie1, Did you try to turn the power off at the breaker box? This resets the whole system ...

goes straight to DEMO mode and refuses to do anything? Any idea? Try resetting cycle-Push cycle select and cycle start together till you hear a long beep followed by three short beeps.this will cancel