Engel 43 Qt.Portable Freezer. "cooling fan motor relay located" Questions

fan. If the cooling system fans and compressor are running, but the refrigerator or freezer is not cooling correctly check for an airflow or defrost system problem. Start Capacitor If the refrigerator

fan. If the cooling system fans and compressor are running, but the refrigerator or freezer is not cooling correctly check for an airflow or defrost system problem. Start Capacitor If the refrigerator

...as if it is not running, or running without refrigerant in the system. Also, if it has a cooling fan motor in that area, make sure it runs, since all fan motors are wired to run at the same

cooling. Here's how to check, and if necessary, fix a faulty condenser fan: Turn the power off and pull your fridge out from the wall so you access the condenser fan. Locate the condenser fan (consult

...cooling. I was away from home for a few days and when I came back the fan was running and the temp was stuck at 62 degrees. I had it set at 54 (and lower)... the fan runs and I think the compressor ...

...fan motor the Fan needs replacement. 3) if the compressor relay is faulty then also fan will not work.the relay is located beside the fan and compressor. ------ if not familiar with checking a local ...

...fan motor has stopped. It is located next to the compressor. If the motor has failed, put a fan in the back of your refrigerator and let it blow into the back of the refrigerator until you get a fan ...

...cooling. I hear the motor trip in and out occasionally. It is a MFD2560HES Sound like the start relay, start capacitor and the overload all located at and near the compressor cover on the side of the ...

...fan is working but that appears to be about all that is happening. It is not cooling at all. Any ideas? Hi!!! Go to the back of the frig and see if the compressor and condensor fan motor are ...

...cooling fan motor located in the bottom rear of the machine behind the rear cover near the compressor. 4. Compressor not running because the start components failed. These are mounted to the side of ...