Linksys Wireless-G Broadband Router "wrt54g lights" Questions

power light on linksys wrt54g is yellow and there is no wireless signal. i reset linksystem and tiny led lights are green,But power light is still yellow. try Lynksys Support and Services

I have a WRT54G-TM with a flashing green power light I have a WRT54G-TM that has a flashing green power light, occasionally connects to the internet for less than one minute, and has no blue light for

WRT54G. Try using a standard network cable. If the port status lights does not turn on on both sides when you connect the cable, use a "crossover" cable. Important: leave the DI-704P WAN port empty. 2

on powering up power light keeps blinking, dmz light is off and all the rest of the light including internet are on. Unable to connect to router in its ip address and unable to do a 30/30/10 reset ...

...WRT54G won't connect to the internet. Lights are on. Tried turning it off, etc. I can connect if I plug my Hughes Net Sat Modem into my PC, but not when I use the router. It worked fine until the end ...

...wrt54g router can't go online. Also check if the power light on your router is blinking. If it is blinking, that's an indication of hardware failure. To revive it, do a hard reset. Press and hold the ...

...lights on on both the modem and the router (WRT54G): power, cables, internet, activity, etc. Even the little lights on the ethernet cable connected to the computer were blinking, indicating Internet ...

linksys WRT54G router Power light and red diag light are steady, other light use to blink but NO more. Can't connect to internet. Is router fried? Thanks. Yes there's a possibility that the router is ...

wrt54g rounter internet light not blinking check the Ethernet wire's connection between your modem and router. check modem's physical connection. otherwise reset your router. If you need any kind of ...

...under the word Linksys) Exact Model and Version If it is a WRT54G : disconnect all ethernet cables leave it ON Press and hold the reset button for 10 - 15 seconds (make sure all the lights