Linksys Wireless-G Broadband Router "2 ghz setup" Questions

GHZ and 2.4 GHZ . if you access the router set up interface , you will find the wireless settings of the router. For 5 GHZ , you can set up different SSID than the SSID of 2.4 GHZ. Make sure that both

...2.4 ghz, do i need to reconfigure? Hi, you should try changing your wireless channel in the router setup. 1) log into your router. 2) go to the wireless setup page. 3) change the 'Wireless Channel' ...

...the name [SSID]. Connect the computer to the router. Open the setup page. Default password is admin. Change the channel to 11-2.462 GHz. If you want to enable wireless security, go for WEP 64

2.4 ghz 54mps. Please help me to setup. Thank you Since you are unable to go via wireless, follow these steps: 1) Access your router configuration pages by typing in 192.168.1.1 into your web browser.

...2, 2.2 Ghz Intel Pentium 4, 40 GB hard drive, 1022 Mb memory, Broadcom 440x 10/100 Integrated Controller and one is a Dell Dimension E510 with Windows XP, Service Pack 2, 2.8 Ghz Intel Pentium 4, 160 ...

...2.4 GHz * Check the enable wireless box and make sure Always is selected. * Type any name as per your choice in Wireless network name. * Check the Enable Auto Channel Scan box. * Select best ...

2.4 GHZ 54Mbps Broadband router. Bought a new desk top computer and it won't let me install the CD. Linksys tech support was unable to assist because the warranty had expired. I was hoping I would not

2.4 GHz wireless interference b. Wireless settings of your router c. Location of the devices d. Obstacles You may also refer to the common causes of interference: Window in brick wall 2dB Metal frame,

...2. open your internet explorer or any browser.3. type the numbers 192.168.1.1 on the address bar4. you will be routed to your router's settings, type admin for USERNAME: and admin for PASSWORD.5. ...

...2. open your internet explorer or any browser.3. type the numbers 192.168.1.1 or 10.1.1.1 on the address bar4. you will be routed to your router's settings, type admin for USERNAME: and admin for ...