Logitech (174040) Consumer Headset "soldering wire" Questions

...wire and 2 soldering spots unaccounted for. When I look at the 2 soldering places, they both have a small strand there, so I can not tell which one the wire broke off of. I tried searching online to ...

...soldering of the middle section. I checked all the wires in the headset using continuity tester and I found all were working. I just need to solder the wires that has been plucked off from the mic ...

...wire diagram to resolder them back. From the broken soldering i can get very limited informations on colors. Any help? If someone reading has this headset model (or one similar), could you open the ...

...plastic to solder it on.too much peeled plastic will create a short,and you have to be good at soldering to do

...or get one from? You would have to solder the wire together and get some electrical tape to put over it, but overall if it was not too expensive I would just buy another, but soldering is an

No noise is coming out of the right earphone If in warranty, return it for repair. Assure that your player is working by trying it with another headset. If it doesn't work, having the balance off to ...

WIRE WILL DO. -carefully use the soldering iron to remove the old earbuds from the circut board. A small soldering iron with a sharp tip works much better than the standard size at this. The soldering

...wire you are soldering. It is usually a coating on the wire and may not be easily seen. If solder sticks easily and well to the wire, the coating is probably removed. If you can, check for continuity ...

my left speaker isnt working, ive checked the cables on it and they are still soddered what should i do? Do you know how to use a VOM? If so see if you are getting continuity between your plug and the

...broke? Does it look like it can be re-soldered? If so, do u have any friends who are good with a soldering iron? You can buy one for under $10 and fix it yourself, but if uncertain, check the ...