Canon EOS 1100D / Rebel T3 Digital Camera "power turn camera" Questions

...turn it back on? Or does it remain off? To save battery power, the camera turns off automatically after about 30 seconds of non-operation. To turn the camera back on, just press the shutter button. ...

Turn the power switch to ON again and check the aperture value displayed on the LCD panel. Refer to the Instruction Manual provided with your camera for instructions for detaching or mounting the lens

...press and hold the power button, or turn the power switch to ON position(depends on the option available in your Camera) for more than 30 Seconds and then reinsert the battery to resolve the

...cahrge overnight. In the morning when I attenpted to turn on the camera I got no power. Chabged the battery stil no power. Any suggestions? Probably batteries had become weak or not properly

turn the power switch to off and on or reinstall the battery After taking a few shots, the following error message appears. Error 99 Shooting is not possible. Turn the power switch to <off> and

turn on power no shots remaning in top will not take photo can remove batt and be ok or not new gen batt 8 gig card can turn on then off and the fault is ther can turn on and its ok Remove battery and

...turn the camera switch to OFF, the green power light stays on but the camera appears to be off. this happens even when I do not have any pictures being written to the memory card. Conversely, when I ...

...turn it on and nothing shows. battery is fully charged. camera was bought in feb this year. HI I AM SAGHA CAMERA REPAIRER FROM MUMBAI, I THINK I HAVE TO SAY THAT YOUR CAMERA IS DEAD RIGHT NOW,A VERY ...

...Turn the power switch to off and on again or re-install the battery.If i open the battery door and close it again the camera will work fine but if i turn it off i will get the same problem again. Is ...

how do i resolve error 20 There has been a malfunction of the mechanisms! Turn the power off and remove then re-install the battery. Turn the power on again. Should be reset now!