Dell Inspiron N5030 Notebook PC "main mother boards" Questions

MY INSPIRON 1150 WONT POWER UP BY MAINS OR BATTERY NO LIGHTS COME ON. CHANGED MAINS AC STILL NO JOY. If there are no light or actions I would guess that the mother board is not getting any power. ...

...main power board. You will need to open the mother board and check on all leads on the mother board- use a magnification observing lens. Tighten all connectors and solder suspected joints. Check with ...

...main-board or mother board. 3. check the power adapter cord also it could have a break at the strain relief at the connector that goes to the laptop. 4. Unit battery age can contribute to early ...

...main mother board, the issue can happen if the drink has reached the graphics card part or the display adapter.Better give it for servicing . I strongly believe it is the problem of display unit ( ...

...main power. See if it changes anything. If you have extra chargers, try them as well. This is to illiminate the causes of this problem. If all these fail. Then there might be a problem with the ...

...worked perfectly, died. Absolutely no response to power up attempts with or without battery or mains charger unit. Taken out memory, hard disc, optical drive, still no response of any kind. I am ...

...mother board, you have to check it first or the main switch check the main switch may be its wire lost if your computer not start i think your power supplier is not wroking you want to change it if ...

mini 10 wont start up Mainly check the power to the PC from the adapter, Check to see if there is voltage to the battery by removing and testing with a multimeter. If there is no voltage check adapter

...main board there is nothing that can be done. If it is a loose connector- well can you or any one take a look see A repair shop perhaps? It can be that it crashed or has suffered internal damage to ...

...main/mother board.. reinstall os.. the above often take place with some error message(s)/blue screen.. but if there's no such displaying, esp if hangs/stops/power off during installation, it may b ...