...cut it. Hope this helps You can use either NMEA or SeaTalk to connect the GPS, iand you can use the SeaTalk for both GPS and pilot.By using SeaTalk you will also supply the GPS with 12V directly. ...
...cut the PCB wire and remove the section around the burn.solder a new wire to bypass the short.Dry the unit and seal with silicone to prevent re occurrence. Its a 2 hour repair requiring a high DIY ...
...cut out the same except the new unit needs a little more space behind and it was a plug for plug swap. Works great and swaps data between the matching chart plotter to give chart overlay on the radar ...
Garmine Marine Network Wiring Garmin Marine Network uses an Ethernet like standard for high speed transmission between Ploters, Radar etc. I have tried to connect two GPSMAP 3205 plotters using ...
...cut the gold PCB flat wire and remove the section around the burn. scrape a small amount of green off the gold flat PCB wire so you can solder a new wire to bypass the short. any 2.5mm insulated wire ...
70 questions posted
Usually answered in minutes!
190 Questions
76 Questions
54 Questions
57 Questions
43 Questions