Xerox 212 Laser Printer "exit cover" Questions

...Exit Cover Red light won't go out keeps saying close exit cover. Exit cover is closed. Turn printer on and off, unplug printer but keeps saying the same thing. Before we replaced the panel light we ...

exit cover to continue" The problem is, the cover is closed! we've turned it on and off, unplugged it completely, opened and closed the door, pulled out the maintenance kit and tray and replaced them,

...Exit Chute Exit Out Chute (PL6.1.1) 1. Remove 2 screws (10 mm, flanged) securing the Exit Out Chute to the Front Cover. 2. Remove the Exit Out Chute from the Front ...

...exit end of the copier you must remove 3 plastic covers 1. one that the paper exits and lays on 2. upper cover {have to slide upper half of copier to left to get to the screw} 3 small plastic cover ...

...exit cover and side cover -unsnaps with 2 pins and there is one more cover I think over the fan that needs to come off. 2.Locate black plastic sheet covering a circuit board carefully pull this ...

...exit cover close error We have checked exit cover and close repeatedly can't get error off. We have un-pluged it and pluged it back in. we can find nothing wrong with the cover?. PLEASE HELP ...

...hard to get to will need to remove fuser,front small square cover and prob exit cover ull see actuator and a long shaft which will lead u to a sensor.it will prob out of place or covered in

...Exit Cover to Continue error message won't go away I been having troubles with paper jams so I took advice and cleaned paper roller guides above the paper tray 2 and plastic strip guides under the ...

...exit cover" message keeps displaying "to continue close exit cover" when the exit cover is ALREADY CLOSED. Could you please tell me how to get the printer to acknowledge the cover is ...

...front cover,pull out the duplex tray,clean the rollers alignement the belt. Enter in the service mode press : STOP - 0 - STOP - 1,select F code history open and close the front cover,press