Xerox 212 Laser Printer "door close machine" Questions

...close front cover but it is already closed. I have opened and closed it many times with no change in result GENERALLY THERE IS A PIN ON THE FRONT DOOR THAT BREAKS AND WILL NOT TRIGGER THE SWITCH ...

...????????? as by pass depends just because the door is closed does not mean that the tab that acurate the sensor that tell the copier the door is close mite be broke check the door for any problem ...

...close the access door error message-door is closed The access door is closed, have turned off turned on opened closed and taken out the ink cartriges & reinstalled. Check the door in the rear of the ...

...times,If the left cover and the front door are closed properly and still showing "close front door" most probably the internal contact of door switch are not good , door switch replacement is ...

...CLOSE LEFTSIDE DOOR I TRIED CLOSING THE DOOR AND IT STILL WOULD NOT WORK. THEN TRIED OTHER DOOR FROM WORKING MACHINES IT DID NOT WORK, AND WHEN THE DOOR WAS RETURNED TO THERE ORIGINAL MACHINE THEY ...

...door, pull down and close firmly shut. If the error persists it could be that the sensor has gone bad. The sensor is actually hard wired to the High Voltage Power Supply that sits right above the ...

...door of the machine same way close it firmly but gentle, make sure everything inside is properly set accordingly to mini instructions inside the machine follow them they will guide you. The machine ...

...be broken check the door look for a slot in the machine where the door close that is where the accurator would go in to tell the copier the door is closed senor that accurator activates mite be

...we think that that is the problem. If your machine do not close the door (and i dont know what model is) the first message will not desappear. First of all you need to see why the door are not ...