Xerox DocuColor 12 Printer "fuser system error 10" Questions

...system fault - Error code 10-389 that could be your fuser/youll maybe have to reset an nwm 10-xxx Codes are Fuser problems and Paper Exit problems error 10-389 ok i am yes ok Hello , sorry my docu ...

...amperage problem in your printer which can trigger a false fuser error. If this does not help, you'll probably need service on the machine since it deals with the LVPS, the fuser and the system

system error e000 went into error mode while attempting to make copies. Unplugged for 10 minutes. Plugged in, error still in effect. E000 The error history indicates any of the following error codes 4

error means Fuser Overheat Error 1 (Hardware). This has happened due to Fuser Low Temperature which occurs due to Abnormal Hot Roller Fusing Lamp Lower Limit Temperature Detected. Try turning off &

i have a xerox 3545 its gave my fult code fuser system error 10-398 i replas the fuser fan but the problem stell back evre time i need same help plz 10-527 01-03

...fuser unit ( this is the most likely of the three ) 2nd, the system board 3rd, the low voltage power supply unit. These parts will need to be inspected by a service technician and replaced as ...

...fuser or worse the system board. a 922 error is created by an open ac circuit(lamp circuit) on the fuser. the t520 t 522's have lamp holder problems that allow arching from the ill fitting metal ...

...system error e000 canon iR1600. i need detailed explanation fuser has failed to reach operating temp within 20sec. Fuser lamp is most likely blown or you are using machine below 10-15~c ambient

...system error E003 I need help!! This error has to do with the Fixing (fuser) unit. The fuser is located in the paper exit area. Try this first, turn the machine off for at least 10 minutes. If that ...

...System Error E000 The above message has appeared and can't use copier at all. According to the manual an error of some kind has ocurred in the machine and am to unplug the machine and wait for 10 ...