...drum is cleaned by the cleaning blade and new oil is applied to the drum for the next image. Check the roller in maintence kit to see if it is dry, if it is replace the maintenance kit. Hope this ...
...imaging units, one at a time, and check by turning the large white gear at the rear of the unit. Be careful how you handle the drum and don't touch the drum surface with your hands. If all your drums ...
...Replace the imaging drum. (Xerox is not responsible for any imaging drums that have been damaged by over exposure to light.) Additional Recommendations: Background toner may increase, if printing ...
...imaging drum. I recommend first replacing the toner as this is probably the cheapest component. After that try replacing the fuser. Fuser kits for this model can be bought off Xerox directly, same as ...
drum thermistor appears to be open. Replace thedrum-temperature sensor. (from http://www.inktechnologies.com/fault_codes.pdf) Where to find it check:http://images.google.co.uk/imgres?imgurl=http://www
...imaging unit consists of the following: ■ An OPC Drum ■ Waste Toner Assembly ■ Charge Roller Assembly 9.0 Consumables, Routine Maintenance Items and Options Item Life ...
Question about Xerox Phaser Office Equipment & Supplies
...8860 prints only on left side of the paper, leaves perfect image on drum of right side. We have replaced the following with no changes: printhead, rollers, transfix roller, wiper blade and exit ...
Question about Xerox Phaser Office Equipment & Supplies
...Phaser 2135 My cyan color is not printing on location with other colors. It was ok before i replaced my magenta & yellow image drums. I removed transfer belt and cleaned and inspected all ...
...replace the drum pivot plate assembly. This assembly is what cleans the drum assembly prior to putting the image on the drum. The pivot plate assembly has a rubber drum cleaning blade on it and when ...
Phaser 8560 smudging problem We just replaced the maintenance kit in our Phase 8560 and now it is leaving smudges of previously printed images on our print outs. I have cleaned the blade on the new ...
345 questions posted
Usually answered in minutes!
436 Questions
262 Questions
152 Questions
147 Questions
158 Questions