I have a fault code of 4-361 any idea what it is? 04-361 is a code 60 imaging unit motor failure. It is rare for a motor to fail so it may be one of your imaging units has seized. Remove the imaging ...
Question about Xerox Phaser Office Equipment & Supplies
...image on drum of right side. We have replaced the following with no changes: printhead, rollers, transfix roller, wiper blade and exit roller and tried multiple types of paper. Dear As per your ...
Question about Xerox Phaser Office Equipment & Supplies
...image unit. if the black film is gritty your new drum could be causing the developer housing to arc. make sure the ground strip on bottom of drum is connected. pon ese en el amarillo, si el fondo ...
Question about Xerox Phaser Office Equipment & Supplies
Xerox Phaser 7400 U28 error message cyan Imaging Unit defective The Service manual says:The Drum Phase Sensor for the named Imaging Unit indicates that the drum is out of position.Initial Actions
Problem with phaser when i print a normal print the white background turns into a grey shade but the rest of the print is fine ie if i were to print an a5 picture on an a4 the picture will be fine but
...image from the drum from the previous copy, and making it ready for the next image is bad 2- the fuser roller is bad and retaining the image on it. Checkitright- this is a solid ink machine there are ...
...sensor. (from http://www.inktechnologies.com/fault_codes.pdf) Where to find it ...
...image drum. When the image is applied to the drum the oi prevents the image from sticking. The cleaning blade cleans the drum after the image is applied to paper. After the image is applied to the ...
I have a Phaser 6200 Printer and when I print the left side of my copy is very faded. Can you help me? This could be an issue with several different components. It could be the toner, fuser, or ...
Question about Xerox Phaser Office Equipment & Supplies
...is not printing on location with other colors. It was ok before i replaced my magenta & yellow image drums. I removed transfer belt and cleaned and inspected all locating points for belt and ...
345 questions posted
Usually answered in minutes!
436 Questions
262 Questions
152 Questions
147 Questions
158 Questions