Question about Xerox Phaser Office Equipment & Supplies
...i printed 20 copies it show a problem Drum catridge smart kit is fault i replaced a new drum chip same it work for 30-40 copies after same problem. Have you tried replacing the whole drum
...fault 4-361 Here is the Diagnostics. 04-361 DRUM MOTOR DRIVE FAIL EXPLANATION Poor Drum Motor rotation. Refer to BSD: CH9.1 CH9.1 Procedure Remove the Drum ASSY (Y/M/C/K), execute DC330 [004-003]. ...
drum warm up fault. There are 2, 150 watt halogen lamps in the drum heater that blow. If you want to replace them let me know, I will sent you the directions. I can pretty much say 100 percent that is
...fault. Help, Thanks Printer paper preheater is open cct. The machine has a seperate drum heater THank you for the information. Any idea if the drum heater is fixable or does it have to be
...FAULT_DM_CAM_ POSITION_ERROR The Drum Maintenance home sensor actuated, but not at the expected time. Inspect the maintenance drawer lift pins for wear. Run diagnostics to verify clutch and sensor ...
Question about Xerox Phaser Office Equipment & Supplies
...drum heater fault code. The drum heaters are 2 ,,, 150 watt halogen lamps. One or both have burnt out. You can verify this by shutting the machine off, then turning it back on and look into the fan ...
Question about Xerox Phaser Office Equipment & Supplies
Phaser 8200 fault 15.004.45:5587 Please help! 15,004.45:TCD_THERMISTOR_SLOW Most likely cause is a failed drum heater. If restart does not fix it the drum heater should be replaced.
...drum surface around the stripper fingers. Service requested that this be a device fault in order to alert the service person to this condition. Step 1: Verify the temperature of the room where the ...
Question about Xerox Phaser Office Equipment & Supplies
...Fault code 15,004.45:35676 Don't have service manual for this unit... just looking for definition of/problem with this particular code? The drum temperature is incorrect as sensed by the drum ...
Question about Xerox Phaser Office Equipment & Supplies
...fault if it cracked. Just a thought, but are you using "Generic Ink" specifically from "Media Sciences" or "Ink Technologies" or "Artesian"? These inks have known problems with ink sticking to drum. ...
345 questions posted
Usually answered in minutes!
436 Questions
262 Questions
152 Questions
147 Questions
158 Questions