Zebra 105SL Thermal Label Printer "head open error fault" Questions

...head".First open cover and remove the ink cartridges.Then open holder and remove the print head.Clean the contacts on printer and print head using piece of cotton and some alcohol.Then put back all ...

head element, but not an open circuit problem for example!! Just guessing though!! Canon keeps the actual reason for many errors secret, I personally do not know why.....this is one of those errors...

open the printer so the head travels to the center, and unplug from the wall while the head is centered. Now you can move the head by hand, and see how hard it is to move it. The printhead on my Koday

...open I get a slowly repeating green LED. The printer has been used mostly for printing text and has had bulk ink refilling of the original cartridges. The colour nozzles progressively blocked over 3 ...

...error in MP730. 1. Hit the "menu": Key 2. Hit "Copy" Key 3. Hit "#" Key 4. Scroll thru the menu headings until you come to "Test Mode" - 12th heading 5. Hit the "3" button- this will bring up Eprom ...

...head travel. Look for crumpled paper again. If you cannot find any paper, the encoder strip may have become dislodged. You will have to take the machine apart. Open the lid, remove the wid=re civers ...

...head overheat error. Whatever you try to do to fix it will not work unless you replace the print and the main logic board. These two parts HAVE to be replaced as a pair to get the machine to work. ...

...open the upper cover. On the right you should see the print head under the top cover (you may need a light). See if you can grab the head and move it. If you can move it then it's not locked. This ...

...head is clean and open for printing.That is why you 'll find the print head assembly parked on top of it. It also has a an electrical pump to milk the print heads and test for ink flow See my this ...

...head block. I'm getting System Error 07,010.43:8651. I changed the maintenance kit when it first happened but it was too late. The old kit was caked in horrible residues and some had clearly spilt ...