Question about Keeway JL 12511 Motorcycles
you all for answering. If you put the choke on does it get better or worse,and have you checked the valve clearances are right
Question about Keeway JL 12511 Motorcycles
what is the valve clearance on 2007 WR 450 F Yamaha valve clearance valve clearance valve clearance Intake valve -0.10mm exhause valve-0.20-0.25mm
valve clearance please? Should be the same as Honda 125 What is the valve clearance of a 125? The intake valve clearance should be 0.08mm (0.003 in) and the exhaust valve clearance should be 0.12mm (0
Question about Keeway JL 12511 Motorcycles
...Valve clearance is allowing for heat exspansion .a extra large clearance is noisy and will not allow the valve to operate properly .too tight a clearance will not shut off the valves and cause ...
valve clearance please help how adjust valve clearance on hero honda splendor + guys mainly the valve gets heated and gets expand so the valve clearance is adjusted . according to my studied knowledge
...valve clearance for a TGB F409 150cc engine should be checked and adjusted as needed, as part of routine maintenance. The proper valve clearance specification for this engine is as follows: Intake ...
...VALVE CLEARANCE Remove: engine cooling fan Remove: timing plug Check: valve clearance Out of specification Adjust. Valve clearance (Cold) Intake-0.10~0.15 mm (0.0039~0.0059 in) Exhaust -0.15~0.20 ...
...Valve Clearance Cold intake - 0.07....0.13mm (0.0028...0.0051 in) Valve Clearance Cold exhaust - 0.12--- 0.18mm (0.0047...0.0071 in) If we can provide further information please advise. Kind regards, ...
...clearance valve rocker tappet i want to ask what is the original clearance of intake and exhaust f pulsar 135LS? Pulsar 135 original tappet clearances INTAKE VALVE 0.05 mm EXHAUST Valve 0.10 mm Get ...
Question about Keeway JL 12511 Motorcycles
Valve clearance ideal setting is 0.10mm however as ideal replacement size shims are not always available use tolerance 0.05 to 0.2mm inlet and exhaust Procedure remove tappet cover rotate motor to tdc
5 questions posted
Usually answered in minutes!
2 Questions
1 Questions
2 Questions